AMS 2431/1-8 八種丸料標準(英文版)
發布時間:2018/10/14 22:50:10

SAE AMS 2431標準中定義了噴丸用中常用的8種丸料。目錄如下:

關于丸料的標準匯編
AMS 2431/1-8
AMS 2431- Peening Media
    General Requirements
噴丸丸料的通用要求C2010.10
AMS 2431/1-Peening Media (ASR):    Cast Steel Shot, Regular Hardness (45 to 52 HRC)普通硬度鑄鋼丸(ASR,45~52HRC)E2010.12
AMS 2431/2-Peening Media (ASH):    Cast Steel Shot, High Hardness (55 to 62 HRC)高硬度鑄鋼丸(ASH,55~62HRC)E2010.12
AMS 2431/3-Peening Media (AWCR):    Conditioned Carbon Steel Cut Wire Shot, Regular Hardness  (45 to 52 HRC) 鈍化后的常規硬度碳鋼絲切割丸(AWCR,45~52HRC)D2007.05
AMS 2431/4-Peening Media (AWS):    Conditioned Stainless Steel Cut Wire Shot, Regular Hardness  (≥45 HRC)鈍化后的不銹鋼絲切割丸(AWS,≥45HRC)C2007.05
AMS 2431/5-Peening Media
    Case Hardened Steel Peening Balls
硬化噴丸球(APB)A2005.05
AMS 2431/6-Peening Media
    Glass Shot
玻璃丸(AGB,48~52HRC)C2007.8
AMS 2431/7- Peening Media Ceramic Shot 陶瓷丸(AZB,58~63HRC)B2013.02
AMS 2431/8-Peening Media (AWCH):    Conditioned Carbon Steel Cut Wire Shot, High Hardness  (45 to 52 HRC)鈍化后的高硬度碳鋼絲切割丸(AWCH,55~62HRC)B2007.05

英文版下載如下:

AMS-2431總則 英文版.pdf

SAE AMS 2431-1 普通硬度鑄鋼丸(ASR,45~52HRC)英文版.pdf

SAE AMS 2431-2 高硬度鑄鋼丸(ASH,55~62HRC)英文版.pdf

SAE AMS 2431-3 鈍化后的常規硬度碳鋼絲切割丸(AWCR,45~52HRC)英文版.pdf

SAE AMS 2431-4 鈍化后的不銹鋼絲切割丸(AWS,≥45HRC)英文版.pdf

SAE AMS 2431-5 硬化噴丸球(APB)英文版.pdf

SAE AMS 2431-6 玻璃丸(AGB,48~52HRC)英文版.pdf

SAE AMS 2431-7 陶瓷丸(AZB,58~63HRC)英文版.pdf

SAE AMS 2431-8 鈍化后的高硬度碳鋼絲切割丸(AWCH,55~62HRC)英文版.pdf


httpwww色午夜com日本